Cat Multipurpose Grease PEHJ0088
For grease fittings and lubrication points in low-load, low-speed applications.
NLGI Grade 2
Recommended Use
Cat Multipurpose Grease is recommended for grease fittings and lubrication points in low-load, low-speed applications and ambient temperatures ranging from -30° to 40°C (-22° to 104°F).
Discover the Difference
Cat Multipurpose Grease is developed, tested and approved by Caterpillar to meet the same high standards as Genuine Cat Parts.
Reduced Component Wear—Resists softening and protects parts from wear.Corrosion Protection—Resists oxidation and protects metal against rust. Will not corrode or damage steel, copper bearing alloys or conventional seal materials.
Excellent General Purpose—Lithium Complex grease for applications where load, speed, temperature and moisture conditions are low.Caterpillar.
The difference counts.™
Cat Dealers define world-class product support. We offer you the right parts and service solutions, when and where you need them.
The Cat Dealer network of highly trained experts keeps your entire fleet up and running to maximize your equipment investment.
Typical Characteristics* |
NLGI# |
2 |
Ambient Range, F |
-22° to +104° |
Ambient Range, C |
-30° to +40° |
Operating Range, F |
-25° to +300° |
Operating Range, C |
-32° to +149° |
Base Fluid Type |
Petroleum |
Thickener Type |
Lithium Complex |
Color |
Blue |
% Molybdenum disulfide |
0 |
Worked Penetration (mm) |
265-295 |
% Change/100,000 stroke |
-5 to+15 |
Roll Stability w/H2O, % change |
N/A |
Viscosity Index, Min |
N/A |
Viscosity @ 100°C, cSt |
19.5-22.5 |
Viscosity @ 40°C, cSt |
230-245 |
4 Ball Wear (mm) Max, Typ. |
0.75 |
4 Ball E.P. Weld Point (kg) Min. |
315 |
Timken E.P. Test OK load (lb) Typ. |
55 Min |
Oxidation-psi drop/500 hr Max |
N/A |
Rust Test |
Pass |
Copper Corrosion |
1b |
Dropping Point |
+260°C (+500°F) |
*The values shown are typical values and should not be used as quality control parameters to either accept or reject product.
Specifications are subject to change without notice.
Other Recommended Greases
Cat Arctic Platinum™ Grease
For extremely cold temperatures down to -50°C (-58°F).
Cat Desert Gold™ Grease
For extremely hot temperatures up to 60°C (140°F).
Cat Ultra 5Moly Grease
For high-load and high-speed conditions in moderate-temperature environments.
Cat Advanced 3Moly Grease
For medium-load and medium-speed conditions in moderate-temperature environments.
Health and Safety
For information on proper use for health, safety, and environment, please refer to the Material Safety Data Sheet (MSDS). Read and understand the MSDS before using this product. Always observe good hygiene measures.
Вернуться к списку
|