Московский Дистрибьюторский Центр

  • На главную
  • Карта сайта
  • Обратная связь
 
 

Телефон в Москве:

+7 (495) 178-09-19

zakaz@skladmasel.ru

 

Cat Advanced 3Moly Grease

Caterpillar: Смазки Caterpillar

 

Cat Advanced 3Moly Grease

For grease fittings and lubrication points in medium-load and medium-speed applications.

NLGI Grade 2

Recommended Use

Cat Advanced 3Moly Grease is recommended for grease fittings and lubrication points in medium-load and medium-speed applications with ambient temperatures ranging from -20° to 40°C (-4° to 104°F).

Discover the Difference

Cat Advanced 3Moly Grease is developed, tested and approved by Caterpillar to meet the same high standards as Genuine Cat Parts. Factory-Fill—Used as standard factory-fill for most Cat machines. Long Life—Lithium based and enhanced with 3% molybdenum disulfide (moly), Cat Advanced 3Moly Grease is an excellent grease for Cat applications where speed, load and temperature are moderate and moisture is low. Reduced Component Wear—Resists softening and protects parts from wear. Corrosion Protection—Resists oxidation and protects metal against rust. Will not corrode or damage steel, copper bearing alloys or conventional seal materials.

Caterpillar. The difference counts.™

Cat Dealers define world-class product support. We offer you the right parts and service solutions, when and where you need them.

The Cat Dealer network of highly trained experts keeps your entire fleet up and running to maximize your equipment investment.

 
 
 
 
 
 
 
 
 

Typical Characteristics*

NLGI#

2

Ambient Range, F

-4° to +104°

Ambient Range, C

-20° to +40°

Operating Range, F

-5° to +300°

Operating Range, C

-21° to +149°

Base Fluid Type

Petroleum

Thickener Type

Lithium Complex

Color

Gray

% Molybdenum disulfide

3

Worked Penetration (mm)

265-295

% Change/100,000 stroke

10 Max

Roll Stability w/H2O, % change

N/A

Viscosity Index, Min

N/A

Viscosity @ 100°C, cSt

22

Viscosity @ 40°C, cSt

320

4 Ball Wear (mm) Max, Typ.

0.55

4 Ball E.P. Weld Point (kg) Min.

315

Timken E.P. Test OK load (lb) Typ.

55 Min

Oxidation-psi drop/500 hr Max

N/A

Rust Test

Pass

Salt Fog Test, hours

N/A

Copper Corrosion

1b

Dropping Point

+260°C (+500°F)

*The values shown are typical values and should not be used as quality control parameters to either accept or reject product. Specifications are subject to change without notice.

Other Recommended Greases

Cat Arctic Platinum™ Grease

For extremely cold temperatures down to -50°C (-58°F).

Cat Desert Gold™ Grease

For extremely hot temperatures up to 60°C (140°F).

Cat Ultra 5Moly Grease

For high-load and high-speed conditions in moderate-temperature environments.

 

Вернуться к списку